diff --git a/libfreerdp-core/errinfo.c b/libfreerdp-core/errinfo.c index f20babc18..bd6899cc4 100644 --- a/libfreerdp-core/errinfo.c +++ b/libfreerdp-core/errinfo.c @@ -21,314 +21,314 @@ /* Protocol-independent codes */ -char ERRINFO_RPC_INITIATED_DISCONNECT_STRING[] = - "The disconnection was initiated by an administrative tool on the server in another session."; +#define ERRINFO_RPC_INITIATED_DISCONNECT_STRING \ + "The disconnection was initiated by an administrative tool on the server in another session." -char ERRINFO_RPC_INITIATED_LOGOFF_STRING[] = - "The disconnection was due to a forced logoff initiated by an administrative tool on the server in another session."; +#define ERRINFO_RPC_INITIATED_LOGOFF_STRING \ + "The disconnection was due to a forced logoff initiated by an administrative tool on the server in another session." -char ERRINFO_IDLE_TIMEOUT_STRING[] = - "The idle session limit timer on the server has elapsed."; +#define ERRINFO_IDLE_TIMEOUT_STRING \ + "The idle session limit timer on the server has elapsed." -char ERRINFO_LOGON_TIMEOUT_STRING[] = - "The active session limit timer on the server has elapsed."; +#define ERRINFO_LOGON_TIMEOUT_STRING \ + "The active session limit timer on the server has elapsed." -char ERRINFO_DISCONNECTED_BY_OTHER_CONNECTION_STRING[] = - "Another user connected to the server, forcing the disconnection of the current connection."; +#define ERRINFO_DISCONNECTED_BY_OTHER_CONNECTION_STRING \ + "Another user connected to the server, forcing the disconnection of the current connection." -char ERRINFO_OUT_OF_MEMORY_STRING[] = - "The server ran out of available memory resources."; +#define ERRINFO_OUT_OF_MEMORY_STRING \ + "The server ran out of available memory resources." -char ERRINFO_SERVER_DENIED_CONNECTION_STRING[] = - "The server denied the connection."; +#define ERRINFO_SERVER_DENIED_CONNECTION_STRING \ + "The server denied the connection." -char ERRINFO_SERVER_INSUFFICIENT_PRIVILEGES_STRING[] = - "The user cannot connect to the server due to insufficient access privileges."; +#define ERRINFO_SERVER_INSUFFICIENT_PRIVILEGES_STRING \ + "The user cannot connect to the server due to insufficient access privileges." -char ERRINFO_SERVER_FRESH_CREDENTIALS_REQUIRED_STRING[] = - "The server does not accept saved user credentials and requires that the user enter their credentials for each connection."; +#define ERRINFO_SERVER_FRESH_CREDENTIALS_REQUIRED_STRING \ + "The server does not accept saved user credentials and requires that the user enter their credentials for each connection." -char ERRINFO_RPC_INITIATED_DISCONNECT_BY_USER_STRING[] = - "The disconnection was initiated by an administrative tool on the server running in the user's session."; +#define ERRINFO_RPC_INITIATED_DISCONNECT_BY_USER_STRING \ + "The disconnection was initiated by an administrative tool on the server running in the user's session." /* Protocol-independent licensing codes */ -char ERRINFO_LICENSE_INTERNAL_STRING[] = - "An internal error has occurred in the Terminal Services licensing component."; +#define ERRINFO_LICENSE_INTERNAL_STRING \ + "An internal error has occurred in the Terminal Services licensing component." -char ERRINFO_LICENSE_NO_LICENSE_SERVER_STRING[] = - "A Remote Desktop License Server ([MS-RDPELE] section 1.1) could not be found to provide a license."; +#define ERRINFO_LICENSE_NO_LICENSE_SERVER_STRING \ + "A Remote Desktop License Server ([MS-RDPELE] section 1.1) could not be found to provide a license." -char ERRINFO_LICENSE_NO_LICENSE_STRING[] = - "There are no Client Access Licenses ([MS-RDPELE] section 1.1) available for the target remote computer."; +#define ERRINFO_LICENSE_NO_LICENSE_STRING \ + "There are no Client Access Licenses ([MS-RDPELE] section 1.1) available for the target remote computer." -char ERRINFO_LICENSE_BAD_CLIENT_MSG_STRING[] = - "The remote computer received an invalid licensing message from the client."; +#define ERRINFO_LICENSE_BAD_CLIENT_MSG_STRING \ + "The remote computer received an invalid licensing message from the client." -char ERRINFO_LICENSE_HWID_DOESNT_MATCH_LICENSE_STRING[] = - "The Client Access License ([MS-RDPELE] section 1.1) stored by the client has been modified."; +#define ERRINFO_LICENSE_HWID_DOESNT_MATCH_LICENSE_STRING \ + "The Client Access License ([MS-RDPELE] section 1.1) stored by the client has been modified." -char ERRINFO_LICENSE_BAD_CLIENT_LICENSE_STRING[] = - "The Client Access License ([MS-RDPELE] section 1.1) stored by the client is in an invalid format."; +#define ERRINFO_LICENSE_BAD_CLIENT_LICENSE_STRING \ + "The Client Access License ([MS-RDPELE] section 1.1) stored by the client is in an invalid format." -char ERRINFO_LICENSE_CANT_FINISH_PROTOCOL_STRING[] = - "Network problems have caused the licensing protocol ([MS-RDPELE] section 1.3.3) to be terminated."; +#define ERRINFO_LICENSE_CANT_FINISH_PROTOCOL_STRING \ + "Network problems have caused the licensing protocol ([MS-RDPELE] section 1.3.3) to be terminated." -char ERRINFO_LICENSE_CLIENT_ENDED_PROTOCOL_STRING[] = - "The client prematurely ended the licensing protocol ([MS-RDPELE] section 1.3.3)."; +#define ERRINFO_LICENSE_CLIENT_ENDED_PROTOCOL_STRING \ + "The client prematurely ended the licensing protocol ([MS-RDPELE] section 1.3.3)." -char ERRINFO_LICENSE_BAD_CLIENT_ENCRYPTION_STRING[] = - "A licensing message ([MS-RDPELE] sections 2.2 and 5.1) was incorrectly encrypted."; +#define ERRINFO_LICENSE_BAD_CLIENT_ENCRYPTION_STRING \ + "A licensing message ([MS-RDPELE] sections 2.2 and 5.1) was incorrectly encrypted." -char ERRINFO_LICENSE_CANT_UPGRADE_LICENSE_STRING[] = - "The Client Access License ([MS-RDPELE] section 1.1) stored by the client could not be upgraded or renewed."; +#define ERRINFO_LICENSE_CANT_UPGRADE_LICENSE_STRING \ + "The Client Access License ([MS-RDPELE] section 1.1) stored by the client could not be upgraded or renewed." -char ERRINFO_LICENSE_NO_REMOTE_CONNECTIONS_STRING[] = - "The remote computer is not licensed to accept remote connections."; +#define ERRINFO_LICENSE_NO_REMOTE_CONNECTIONS_STRING \ + "The remote computer is not licensed to accept remote connections." /* RDP specific codes */ -char ERRINFO_UNKNOWN_DATA_PDU_TYPE_STRING[] = - "Unknown pduType2 field in a received Share Data Header (section 2.2.8.1.1.1.2)."; +#define ERRINFO_UNKNOWN_DATA_PDU_TYPE_STRING \ + "Unknown pduType2 field in a received Share Data Header (section 2.2.8.1.1.1.2)." -char ERRINFO_UNKNOWN_PDU_TYPE_STRING[] = - "Unknown pduType field in a received Share Control Header (section 2.2.8.1.1.1.1)."; +#define ERRINFO_UNKNOWN_PDU_TYPE_STRING \ + "Unknown pduType field in a received Share Control Header (section 2.2.8.1.1.1.1)." -char ERRINFO_DATA_PDU_SEQUENCE_STRING[] = - "An out-of-sequence Slow-Path Data PDU (section 2.2.8.1.1.1.1) has been received."; +#define ERRINFO_DATA_PDU_SEQUENCE_STRING \ + "An out-of-sequence Slow-Path Data PDU (section 2.2.8.1.1.1.1) has been received." -char ERRINFO_CONTROL_PDU_SEQUENCE_STRING[] = - "An out-of-sequence Slow-Path Non-Data PDU (section 2.2.8.1.1.1.1) has been received."; +#define ERRINFO_CONTROL_PDU_SEQUENCE_STRING \ + "An out-of-sequence Slow-Path Non-Data PDU (section 2.2.8.1.1.1.1) has been received." -char ERRINFO_INVALID_CONTROL_PDU_ACTION_STRING[] = - "A Control PDU (sections 2.2.1.15 and 2.2.1.16) has been received with an invalid action field."; +#define ERRINFO_INVALID_CONTROL_PDU_ACTION_STRING \ + "A Control PDU (sections 2.2.1.15 and 2.2.1.16) has been received with an invalid action field." -char ERRINFO_INVALID_INPUT_PDU_TYPE_STRING[] = - "(a) A Slow-Path Input Event (section 2.2.8.1.1.3.1.1) has been received with an invalid messageType field.\n" - "(b) A Fast-Path Input Event (section 2.2.8.1.2.2) has been received with an invalid eventCode field."; +#define ERRINFO_INVALID_INPUT_PDU_TYPE_STRING \ + "(a) A Slow-Path Input Event (section 2.2.8.1.1.3.1.1) has been received with an invalid messageType field.\n" \ + "(b) A Fast-Path Input Event (section 2.2.8.1.2.2) has been received with an invalid eventCode field." -char ERRINFO_INVALID_INPUT_PDU_MOUSE_STRING[] = - "(a) A Slow-Path Mouse Event (section 2.2.8.1.1.3.1.1.3) or Extended Mouse Event " - "(section 2.2.8.1.1.3.1.1.4) has been received with an invalid pointerFlags field.\n" - "(b) A Fast-Path Mouse Event (section 2.2.8.1.2.2.3) or Fast-Path Extended Mouse Event " - "(section 2.2.8.1.2.2.4) has been received with an invalid pointerFlags field."; +#define ERRINFO_INVALID_INPUT_PDU_MOUSE_STRING \ + "(a) A Slow-Path Mouse Event (section 2.2.8.1.1.3.1.1.3) or Extended Mouse Event " \ + "(section 2.2.8.1.1.3.1.1.4) has been received with an invalid pointerFlags field.\n" \ + "(b) A Fast-Path Mouse Event (section 2.2.8.1.2.2.3) or Fast-Path Extended Mouse Event " \ + "(section 2.2.8.1.2.2.4) has been received with an invalid pointerFlags field." -char ERRINFO_INVALID_REFRESH_RECT_PDU_STRING[] = - "An invalid Refresh Rect PDU (section 2.2.11.2) has been received."; +#define ERRINFO_INVALID_REFRESH_RECT_PDU_STRING \ + "An invalid Refresh Rect PDU (section 2.2.11.2) has been received." -char ERRINFO_CREATE_USER_DATA_FAILED_STRING[] = - "The server failed to construct the GCC Conference Create Response user data (section 2.2.1.4)."; +#define ERRINFO_CREATE_USER_DATA_FAILED_STRING \ + "The server failed to construct the GCC Conference Create Response user data (section 2.2.1.4)." -char ERRINFO_CONNECT_FAILED_STRING[] = - "Processing during the Channel Connection phase of the RDP Connection Sequence " - "(see section 1.3.1.1 for an overview of the RDP Connection Sequence phases) has failed."; +#define ERRINFO_CONNECT_FAILED_STRING \ + "Processing during the Channel Connection phase of the RDP Connection Sequence " \ + "(see section 1.3.1.1 for an overview of the RDP Connection Sequence phases) has failed." -char ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_SHAREID_STRING[] = - "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid shareId field."; +#define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_SHAREID_STRING \ + "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid shareId field." -char ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_ORIGINATOR_STRING[] = - "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid originatorId field."; +#define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_ORIGINATOR_STRING \ + "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid originatorId field." -char ERRINFO_PERSISTENT_KEY_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process a Persistent Key List PDU (section 2.2.1.17)."; +#define ERRINFO_PERSISTENT_KEY_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process a Persistent Key List PDU (section 2.2.1.17)." -char ERRINFO_PERSISTENT_KEY_PDU_ILLEGAL_FIRST_STRING[] = - "A Persistent Key List PDU (section 2.2.1.17) marked as PERSIST_PDU_FIRST (0x01) was received after the reception " - "of a prior Persistent Key List PDU also marked as PERSIST_PDU_FIRST."; +#define ERRINFO_PERSISTENT_KEY_PDU_ILLEGAL_FIRST_STRING \ + "A Persistent Key List PDU (section 2.2.1.17) marked as PERSIST_PDU_FIRST (0x01) was received after the reception " \ + "of a prior Persistent Key List PDU also marked as PERSIST_PDU_FIRST." -char ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_TOTAL_KEYS_STRING[] = - "A Persistent Key List PDU (section 2.2.1.17) was received which specified a total number of bitmap cache entries larger than 262144."; +#define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_TOTAL_KEYS_STRING \ + "A Persistent Key List PDU (section 2.2.1.17) was received which specified a total number of bitmap cache entries larger than 262144." -char ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_CACHE_KEYS_STRING[] = - "A Persistent Key List PDU (section 2.2.1.17) was received which specified an invalid total number of keys for a bitmap cache " - "(the number of entries that can be stored within each bitmap cache is specified in the Revision 1 or 2 Bitmap Cache Capability Set " - "(section 2.2.7.1.4) that is sent from client to server)."; +#define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_CACHE_KEYS_STRING \ + "A Persistent Key List PDU (section 2.2.1.17) was received which specified an invalid total number of keys for a bitmap cache " \ + "(the number of entries that can be stored within each bitmap cache is specified in the Revision 1 or 2 Bitmap Cache Capability Set " \ + "(section 2.2.7.1.4) that is sent from client to server)." -char ERRINFO_INPUT_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process Input Event PDU Data (section 2.2.8.1.1.3.1) or a Fast-Path Input Event PDU (section 2.2.8.1.2)."; +#define ERRINFO_INPUT_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process Input Event PDU Data (section 2.2.8.1.1.3.1) or a Fast-Path Input Event PDU (section 2.2.8.1.2)." \ -char ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process the shareDataHeader, NumInfoBlocks, " - "Pad1, and Pad2 fields of the Bitmap Cache Error PDU Data ([MS-RDPEGDI] section 2.2.2.3.1.1)."; +#define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process the shareDataHeader, NumInfoBlocks, " \ + "Pad1, and Pad2 fields of the Bitmap Cache Error PDU Data ([MS-RDPEGDI] section 2.2.2.3.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT_STRING[] = - "(a) The dataSignature field of the Fast-Path Input Event PDU (section 2.2.8.1.2) does not contain enough data.\n" - "(b) The fipsInformation and dataSignature fields of the Fast-Path Input Event PDU (section 2.2.8.1.2) do not contain enough data."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT_STRING \ + "(a) The dataSignature field of the Fast-Path Input Event PDU (section 2.2.8.1.2) does not contain enough data.\n" \ + "(b) The fipsInformation and dataSignature fields of the Fast-Path Input Event PDU (section 2.2.8.1.2) do not contain enough data." -char ERRINFO_VCHANNEL_DATA_TOO_SHORT_STRING[] = - "(a) There is not enough data in the Client Network Data (section 2.2.1.3.4) to read the virtual channel configuration data.\n" - "(b) There is not enough data to read a complete Channel PDU Header (section 2.2.6.1.1)."; +#define ERRINFO_VCHANNEL_DATA_TOO_SHORT_STRING \ + "(a) There is not enough data in the Client Network Data (section 2.2.1.3.4) to read the virtual channel configuration data.\n" \ + "(b) There is not enough data to read a complete Channel PDU Header (section 2.2.6.1.1)." -char ERRINFO_SHARE_DATA_TOO_SHORT_STRING[] = - "(a) There is not enough data to process Control PDU Data (section 2.2.1.15.1).\n" - "(b) There is not enough data to read a complete Share Control Header (section 2.2.8.1.1.1.1).\n" - "(c) There is not enough data to read a complete Share Data Header (section 2.2.8.1.1.1.2) of a Slow-Path Data PDU (section 2.2.8.1.1.1.1).\n" - "(d) There is not enough data to process Font List PDU Data (section 2.2.1.18.1)."; +#define ERRINFO_SHARE_DATA_TOO_SHORT_STRING \ + "(a) There is not enough data to process Control PDU Data (section 2.2.1.15.1).\n" \ + "(b) There is not enough data to read a complete Share Control Header (section 2.2.8.1.1.1.1).\n" \ + "(c) There is not enough data to read a complete Share Data Header (section 2.2.8.1.1.1.2) of a Slow-Path Data PDU (section 2.2.8.1.1.1.1).\n" \ + "(d) There is not enough data to process Font List PDU Data (section 2.2.1.18.1)." -char ERRINFO_BAD_SUPPRESS_OUTPUT_PDU_STRING[] = - "(a) There is not enough data to process Suppress Output PDU Data (section 2.2.11.3.1).\n" - "(b) The allowDisplayUpdates field of the Suppress Output PDU Data (section 2.2.11.3.1) is invalid."; +#define ERRINFO_BAD_SUPPRESS_OUTPUT_PDU_STRING \ + "(a) There is not enough data to process Suppress Output PDU Data (section 2.2.11.3.1).\n" \ + "(b) The allowDisplayUpdates field of the Suppress Output PDU Data (section 2.2.11.3.1) is invalid." -char ERRINFO_CONFIRM_ACTIVE_PDU_TOO_SHORT_STRING[] = - "(a) There is not enough data to read the shareControlHeader, shareId, originatorId, lengthSourceDescriptor, " - "and lengthCombinedCapabilities fields of the Confirm Active PDU Data (section 2.2.1.13.2.1).\n" - "(b) There is not enough data to read the sourceDescriptor, numberCapabilities, pad2Octets, and capabilitySets " - "fields of the Confirm Active PDU Data (section 2.2.1.13.2.1)."; +#define ERRINFO_CONFIRM_ACTIVE_PDU_TOO_SHORT_STRING \ + "(a) There is not enough data to read the shareControlHeader, shareId, originatorId, lengthSourceDescriptor, " \ + "and lengthCombinedCapabilities fields of the Confirm Active PDU Data (section 2.2.1.13.2.1).\n" \ + "(b) There is not enough data to read the sourceDescriptor, numberCapabilities, pad2Octets, and capabilitySets " \ + "fields of the Confirm Active PDU Data (section 2.2.1.13.2.1)." -char ERRINFO_CAPABILITY_SET_TOO_SMALL_STRING[] = - "There is not enough data to read the capabilitySetType and the lengthCapability fields in a received Capability Set (section 2.2.1.13.1.1.1)."; +#define ERRINFO_CAPABILITY_SET_TOO_SMALL_STRING \ + "There is not enough data to read the capabilitySetType and the lengthCapability fields in a received Capability Set (section 2.2.1.13.1.1.1)." -char ERRINFO_CAPABILITY_SET_TOO_LARGE_STRING[] = - "A Capability Set (section 2.2.1.13.1.1.1) has been received with a lengthCapability " - "field that contains a value greater than the total length of the data received."; +#define ERRINFO_CAPABILITY_SET_TOO_LARGE_STRING \ + "A Capability Set (section 2.2.1.13.1.1.1) has been received with a lengthCapability " \ + "field that contains a value greater than the total length of the data received." -char ERRINFO_NO_CURSOR_CACHE_STRING[] = - "(a) Both the colorPointerCacheSize and pointerCacheSize fields in the Pointer Capability Set (section 2.2.7.1.5) are set to zero.\n" - "(b) The pointerCacheSize field in the Pointer Capability Set (section 2.2.7.1.5) is not present, and the colorPointerCacheSize field is set to zero."; +#define ERRINFO_NO_CURSOR_CACHE_STRING \ + "(a) Both the colorPointerCacheSize and pointerCacheSize fields in the Pointer Capability Set (section 2.2.7.1.5) are set to zero.\n" \ + "(b) The pointerCacheSize field in the Pointer Capability Set (section 2.2.7.1.5) is not present, and the colorPointerCacheSize field is set to zero." -char ERRINFO_BAD_CAPABILITIES_STRING[] = - "The capabilities received from the client in the Confirm Active PDU (section 2.2.1.13.2) were not accepted by the server."; +#define ERRINFO_BAD_CAPABILITIES_STRING \ + "The capabilities received from the client in the Confirm Active PDU (section 2.2.1.13.2) were not accepted by the server." -char ERRINFO_VIRTUAL_CHANNEL_DECOMPRESSION_STRING[] = - "An error occurred while using the bulk compressor (section 3.1.8 and [MS-RDPEGDI] section 3.1.8) to decompress a Virtual Channel PDU (section 2.2.6.1)"; +#define ERRINFO_VIRTUAL_CHANNEL_DECOMPRESSION_STRING \ + "An error occurred while using the bulk compressor (section 3.1.8 and [MS-RDPEGDI] section 3.1.8) to decompress a Virtual Channel PDU (section 2.2.6.1)" -char ERRINFO_INVALID_VC_COMPRESSION_TYPE_STRING[] = - "An invalid bulk compression package was specified in the flags field of the Channel PDU Header (section 2.2.6.1.1)."; +#define ERRINFO_INVALID_VC_COMPRESSION_TYPE_STRING \ + "An invalid bulk compression package was specified in the flags field of the Channel PDU Header (section 2.2.6.1.1)." -char ERRINFO_INVALID_CHANNEL_ID_STRING[] = - "An invalid MCS channel ID was specified in the mcsPdu field of the Virtual Channel PDU (section 2.2.6.1)."; +#define ERRINFO_INVALID_CHANNEL_ID_STRING \ + "An invalid MCS channel ID was specified in the mcsPdu field of the Virtual Channel PDU (section 2.2.6.1)." -char ERRINFO_VCHANNELS_TOO_MANY_STRING[] = - "The client requested more than the maximum allowed 31 static virtual channels in the Client Network Data (section 2.2.1.3.4)."; +#define ERRINFO_VCHANNELS_TOO_MANY_STRING \ + "The client requested more than the maximum allowed 31 static virtual channels in the Client Network Data (section 2.2.1.3.4)." -char ERRINFO_REMOTEAPP_NOT_ENABLED_STRING[] = - "The INFO_RAIL flag (0x00008000) MUST be set in the flags field of the Info Packet (section 2.2.1.11.1.1) " - "as the session on the remote server can only host remote applications."; +#define ERRINFO_REMOTEAPP_NOT_ENABLED_STRING \ + "The INFO_RAIL flag (0x00008000) MUST be set in the flags field of the Info Packet (section 2.2.1.11.1.1) " \ + "as the session on the remote server can only host remote applications." -char ERRINFO_CACHE_CAP_NOT_SET_STRING[] = - "The client sent a Persistent Key List PDU (section 2.2.1.17) without including the prerequisite Revision 2 Bitmap Cache " - "Capability Set (section 2.2.7.1.4.2) in the Confirm Active PDU (section 2.2.1.13.2)."; +#define ERRINFO_CACHE_CAP_NOT_SET_STRING \ + "The client sent a Persistent Key List PDU (section 2.2.1.17) without including the prerequisite Revision 2 Bitmap Cache " \ + "Capability Set (section 2.2.7.1.4.2) in the Confirm Active PDU (section 2.2.1.13.2)." -char ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH2_STRING[] = - "The NumInfoBlocks field in the Bitmap Cache Error PDU Data is inconsistent with the amount of data in the " - "Info field ([MS-RDPEGDI] section 2.2.2.3.1.1)."; +#define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH2_STRING \ + "The NumInfoBlocks field in the Bitmap Cache Error PDU Data is inconsistent with the amount of data in the " \ + "Info field ([MS-RDPEGDI] section 2.2.2.3.1.1)." -char ERRINFO_OFFSCREEN_CACHE_ERROR_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process an Offscreen Bitmap Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.2)."; +#define ERRINFO_OFFSCREEN_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process an Offscreen Bitmap Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.2)." -char ERRINFO_DRAWNINEGRID_CACHE_ERROR_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process a DrawNineGrid Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.3)."; +#define ERRINFO_DRAWNINEGRID_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process a DrawNineGrid Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.3)." -char ERRINFO_GDIPLUS_PDU_BAD_LENGTH_STRING[] = - "There is not enough data to process a GDI+ Error PDU ([MS-RDPEGDI] section 2.2.2.3.4)."; +#define ERRINFO_GDIPLUS_PDU_BAD_LENGTH_STRING \ + "There is not enough data to process a GDI+ Error PDU ([MS-RDPEGDI] section 2.2.2.3.4)." -char ERRINFO_SECURITY_DATA_TOO_SHORT2_STRING[] = - "There is not enough data to read a Basic Security Header (section 2.2.8.1.1.2.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT2_STRING \ + "There is not enough data to read a Basic Security Header (section 2.2.8.1.1.2.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT3_STRING[] = - "There is not enough data to read a Non-FIPS Security Header (section 2.2.8.1.1.2.2) or FIPS Security Header (section 2.2.8.1.1.2.3)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT3_STRING \ + "There is not enough data to read a Non-FIPS Security Header (section 2.2.8.1.1.2.2) or FIPS Security Header (section 2.2.8.1.1.2.3)." -char ERRINFO_SECURITY_DATA_TOO_SHORT4_STRING[] = - "There is not enough data to read the basicSecurityHeader and length fields of the Security Exchange PDU Data (section 2.2.1.10.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT4_STRING \ + "There is not enough data to read the basicSecurityHeader and length fields of the Security Exchange PDU Data (section 2.2.1.10.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT5_STRING[] = - "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " - "cbWorkingDir, Domain, UserName, Password, AlternateShell, and WorkingDir fields in the Info Packet (section 2.2.1.11.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT5_STRING \ + "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " \ + "cbWorkingDir, Domain, UserName, Password, AlternateShell, and WorkingDir fields in the Info Packet (section 2.2.1.11.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT6_STRING[] = - "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " - "and cbWorkingDir fields in the Info Packet (section 2.2.1.11.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT6_STRING \ + "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " \ + "and cbWorkingDir fields in the Info Packet (section 2.2.1.11.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT7_STRING[] = - "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT7_STRING \ + "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT8_STRING[] = - "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT8_STRING \ + "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT9_STRING[] = - "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT9_STRING \ + "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT10_STRING[] = - "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT10_STRING \ + "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT11_STRING[] = - "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT11_STRING \ + "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT12_STRING[] = - "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT12_STRING \ + "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT13_STRING[] = - "There is not enough data to read the performanceFlags field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT13_STRING \ + "There is not enough data to read the performanceFlags field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT14_STRING[] = - "There is not enough data to read the cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT14_STRING \ + "There is not enough data to read the cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT15_STRING[] = - "There is not enough data to read the autoReconnectCookie field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT15_STRING \ + "There is not enough data to read the autoReconnectCookie field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT16_STRING[] = - "The cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1) contains a value " - "which is larger than the maximum allowed length of 128 bytes."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT16_STRING \ + "The cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1) contains a value " \ + "which is larger than the maximum allowed length of 128 bytes." -char ERRINFO_SECURITY_DATA_TOO_SHORT17_STRING[] = - "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT17_STRING \ + "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT18_STRING[] = - "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT18_STRING \ + "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT19_STRING[] = - "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT19_STRING \ + "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT20_STRING[] = - "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT20_STRING \ + "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT21_STRING[] = - "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT21_STRING \ + "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT22_STRING[] = - "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT22_STRING \ + "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)." -char ERRINFO_SECURITY_DATA_TOO_SHORT23_STRING[] = - "There is not enough data to read the Client Info PDU Data (section 2.2.1.11.1)."; +#define ERRINFO_SECURITY_DATA_TOO_SHORT23_STRING \ + "There is not enough data to read the Client Info PDU Data (section 2.2.1.11.1)." -char ERRINFO_BAD_MONITOR_DATA_STRING[] = - "The monitorCount field in the Client Monitor Data (section 2.2.1.3.6) is invalid."; +#define ERRINFO_BAD_MONITOR_DATA_STRING \ + "The monitorCount field in the Client Monitor Data (section 2.2.1.3.6) is invalid." -char ERRINFO_VC_DECOMPRESSED_REASSEMBLE_FAILED_STRING[] = - "The server-side decompression buffer is invalid, or the size of the decompressed VC data exceeds " - "the chunking size specified in the Virtual Channel Capability Set (section 2.2.7.1.10)."; +#define ERRINFO_VC_DECOMPRESSED_REASSEMBLE_FAILED_STRING \ + "The server-side decompression buffer is invalid, or the size of the decompressed VC data exceeds " \ + "the chunking size specified in the Virtual Channel Capability Set (section 2.2.7.1.10)." -char ERRINFO_VC_DATA_TOO_LONG_STRING[] = - "The size of a received Virtual Channel PDU (section 2.2.6.1) exceeds the chunking size specified " - "in the Virtual Channel Capability Set (section 2.2.7.1.10)."; +#define ERRINFO_VC_DATA_TOO_LONG_STRING \ + "The size of a received Virtual Channel PDU (section 2.2.6.1) exceeds the chunking size specified " \ + "in the Virtual Channel Capability Set (section 2.2.7.1.10)." -char ERRINFO_GRAPHICS_MODE_NOT_SUPPORTED_STRING[] = - "The graphics mode requested by the client is not supported by the server."; +#define ERRINFO_GRAPHICS_MODE_NOT_SUPPORTED_STRING \ + "The graphics mode requested by the client is not supported by the server." -char ERRINFO_GRAPHICS_SUBSYSTEM_RESET_FAILED_STRING[] = - "The server-side graphics subsystem failed to reset."; +#define ERRINFO_GRAPHICS_SUBSYSTEM_RESET_FAILED_STRING \ + "The server-side graphics subsystem failed to reset." -char ERRINFO_UPDATE_SESSION_KEY_FAILED_STRING[] = - "An attempt to update the session keys while using Standard RDP Security mechanisms (section 5.3.7) failed."; +#define ERRINFO_UPDATE_SESSION_KEY_FAILED_STRING \ + "An attempt to update the session keys while using Standard RDP Security mechanisms (section 5.3.7) failed." -char ERRINFO_DECRYPT_FAILED_STRING[] = - "(a) Decryption using Standard RDP Security mechanisms (section 5.3.6) failed.\n" - "(b) Session key creation using Standard RDP Security mechanisms (section 5.3.5) failed."; +#define ERRINFO_DECRYPT_FAILED_STRING \ + "(a) Decryption using Standard RDP Security mechanisms (section 5.3.6) failed.\n" \ + "(b) Session key creation using Standard RDP Security mechanisms (section 5.3.5) failed." -char ERRINFO_ENCRYPT_FAILED_STRING[] = - "Encryption using Standard RDP Security mechanisms (section 5.3.6) failed."; +#define ERRINFO_ENCRYPT_FAILED_STRING \ + "Encryption using Standard RDP Security mechanisms (section 5.3.6) failed." -char ERRINFO_ENCRYPTION_PACKAGE_MISMATCH_STRING[] = - "Failed to find a usable Encryption Method (section 5.3.2) in the encryptionMethods field of the Client Security Data (section 2.2.1.4.3)."; +#define ERRINFO_ENCRYPTION_PACKAGE_MISMATCH_STRING \ + "Failed to find a usable Encryption Method (section 5.3.2) in the encryptionMethods field of the Client Security Data (section 2.2.1.4.3)." -char ERRINFO_DECRYPT_FAILED2_STRING[] = - "Unencrypted data was encountered in a protocol stream which is meant to be encrypted with Standard RDP Security mechanisms (section 5.3.6)."; +#define ERRINFO_DECRYPT_FAILED2_STRING \ + "Unencrypted data was encountered in a protocol stream which is meant to be encrypted with Standard RDP Security mechanisms (section 5.3.6)." /* Special codes */ -char ERRINFO_SUCCESS_STRING[] = "Success."; -char ERRINFO_NONE_STRING[] = ""; +#define ERRINFO_SUCCESS_STRING "Success." +#define ERRINFO_NONE_STRING "" -ERRINFO ERRINFO_CODES[] = +static const ERRINFO ERRINFO_CODES[] = { ERRINFO_DEFINE(SUCCESS), @@ -433,7 +433,7 @@ ERRINFO ERRINFO_CODES[] = void rdp_print_errinfo(uint32 code) { - ERRINFO* errInfo; + const ERRINFO* errInfo; errInfo = &ERRINFO_CODES[0];